Audley DTF White Ink – No-Sediment, Micro-Precipitation Technology, High Whiteness, 1 Liter – Prevents Clogs, Printhead Safe, for Epson & Most DTF Printers

No-Sediment DTF White Ink – Clean Prints, Zero Clogs, Maximum Performance

Tired of shaking bottles and cleaning clogs? Say hello to Audley DTF White Ink — engineered with micro-precipitation technology to deliver a truly no-sediment formula that keeps your prints clean and your workflow smooth. Whether you're printing daily or letting your machine idle, this white pigment ink keeps flowing without the mess.

✅ Key Features:

• No Sediment Formula – Prevents pigment buildup and clogs for smooth, consistent printing

• Micro-Precipitation Technology – Keeps white pigment particles evenly suspended

• Long Idle Time – Up to 15 days of standby without flushing or nozzle cleaning

• High Whiteness & Coverage – Bright, bold white prints with excellent fabric adhesion

• Printhead Safe – Less cleaning, longer printhead lifespan, reduced downtime

• Lab-Tested Performance – Withstands 50+ hours of continuous printing without clogging

📦 Product Details:

• Ink Type: White Pigment Ink for DTF Printing

• Bottle Size: 1 Liter

• Compatibility: Epson i3200, XP600, L1800, 4720, DX5, DX7 & most DTF printers using white pigment ink

• Usage Tip: Shake gently before use. Do not mix with other ink types or brands.

⚙️ Usage Instructions

For new machines:
You can fill and use the ink directly — no flushing required.

For machines previously using standard white ink:
You must fully clean the ink system before switching to this no-sediment formula.

Method 1 – Deep Cleaning Method

1. Pour out the old white ink into its original bottle

2. Thoroughly flush ink cartridges, tubes, filters, dampers, and printhead with purified water

3. Drain all remaining water

4. Shake the new ink well and fill the cartridges

5. Use a syringe to draw ink through the dampers and fill the system

6. Run a cleaning cycle and nozzle test until results are normal

Method 2 – Quick Flush Method

1. Turn off the white ink circulation pump

2. Pour out the old ink and rinse cartridges with purified water

3. Drain the water and add the shaken new white ink

4. Print a nozzle check page, then run a continuous print of 20–30 meters to flush the old ink from the system

5. Resume normal use and turn the pump back on

⚠️ Storage & Safety Tips:

• Store between 5–30°C, away from sunlight

• Use in a well-ventilated area

• Avoid contact with eyes/skin; rinse with water if needed

• Keep out of reach of children and pets

💡 Pro Tips for Best Results:

• Use with a white ink circulation system

• If switching from standard white ink, flush the system to avoid mixing

• Invert bottle gently before refilling – no hard shaking required